Press ENTER to Confirm or ESC to Cancel:
Figure 21-3 Menu 12.3.1 Edit Bridge Static Route
The following table describes the Edit Bridge Static Route menu.
FIELD
Route #
This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name
Type a name for the bridge static route for identification purposes.
Indicates whether the static route is active (Yes) or not (No).
Active
Ether Address
Type the MAC address of the destination computer that you want to bridge the packets
to.
IP Address
If available, type the IP address of the destination computer that you want to bridge the
packets to.
Gateway Node
Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one to
eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Bridging Setup
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Table 21-2 Menu 12.3.1 Edit Bridge Static Route
Prestige 861H User's Guide
DESCRIPTION
21-5