Programming; Programming The Radar Device - Siemens SITRANS L Operating Instructions Manual

Commissioning
6.2 Operating via the handheld programmer
Key functions in measurement mode
Key
6.2.3

Programming

6.2.3.1

Programming the radar device

Note
• While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
• The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 2 minutes, depending on the menu level).
Change parameter settings and set operating conditions to suit your specific application. For
remote operation see Operating via AMS Device Manager (Page 65).
50
Function
Updates internal enclosure temperature
reading.
Updates echo confidence value.
Updates distance measurement.
Mode opens PROGRAM mode.
RIGHT arrow opens PROGRAM mode.
UP or DOWN arrow toggles between
AIFB 1 and AIFB 2.
Result
New value is displayed in LCD secondary re-
gion.
Opens the menu level last displayed in this
power cycle, unless power has been cycled
since exiting PROGRAM mode or more than
10 minutes have elapsed since PROGRAM
mode was used. Then top level menu will be
displayed.
Opens the top level menu.
Identifies which AIFB is the source of the
displayed value.
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH