Setup (Ltb) - Siemens SITRANS L Operating Instructions Manual

1. To enable simulation select Fixed value or Ramp in the Simulation field.
2. If you select Fixed value, enter a Simulation Value.
3. If you select Ramp, enter the ramp start, end, number of steps, and steplength.
4. Click Apply.
5. After simulation is complete, set Simulation to OFF and click Apply.
7.1.9.3

Setup (LTB)

Sensor (LTB)
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Remote operation
7.1 Operating via AMS Device Manager
77