Quick Start Wizard Via The Handheld Programmer_Note - Siemens SITRANS L Operating Instructions Manual

Commissioning
6.2 Operating via the handheld programmer
Key
6.2.3.2

Quick Start Wizard via the handheld programmer_note

Note
• A reset to factory defaults should be performed before running the Quick Start Wizard if
the device has been used in a previous application. See Master Reset (4.1.).
• The Quick Start wizard settings are inter-related and changes apply only after you select
Finish in the Wizard Complete step.
• Do not use the Quick Start wizard to modify parameters: see instead Parameter reference
(Page 120). (Perform customization for your application only after the Quick Start has
been completed).
• Default settings in the parameter tables are indicated with an asterisk (*).
1. Quick Start
1.1. Quick Start Wiz
• Point the programmer at the display from a maximum distance of 300 mm (1 ft), then
press RIGHT arrow
• Press RIGHT arrow
• Press RIGHT arrow
and move directly to the next item.
• To change a setting, scroll to the desired item or key in a new value.
• After modifying a value, press RIGHT arrow
move to the next item.
• Quick Start settings take effect only after you select Finish.
54
Name
Plus or minus
sign
Numeral
to
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1.1 and open parameter view.
to open Edit mode or DOWN arrow
Function
Numeric Changes the sign of the entered value.
editing
Numeric Enters the corresponding character.
editing
to accept it and press DOWN arrow
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
to accept default values
to