Step 3 - Vessel Shape
Click on Step 3 - Vessel Shape in the navigation window. Select the vessel shape. To describe
a more complex shape, select Linearization Table in the Vessel Shape field and see
Linearization (LTB) (Page 79) for more details. Click on Apply to save settings then go to Step
4.
Step 4 - Ranges
Click on Step 4 - Ranges in the navigation window. On the tab Step 4 of 5 Ranges: set the
parameters, and click on Apply to save settings. If necessary, click on the Breakpoints tab, set
the parameters, and click on Apply to save settings. Go to Step 5.
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Remote operation
7.1 Operating via AMS Device Manager
73