Maintenance & Diagnostics (Resource) - Siemens SITRANS L Operating Instructions Manual

7.1.12.4 Maintenance & Diagnostics (RESOURCE)
Navigate to Configure/Setup > RESOURCE > Maintenance & Diagnostics for access to:
Remaining Device Lifetime
[see Remaining Device Lifetime (4.2.)]
• Lifetime (expected) [see Lifetime (expected (4.2.1.)]
• Remaining Lifetime (read only) [see Remaining Lifetime (4.2.3.)]
• Time in Operation (read only) [see Time in Operation (4.2.2.)]
• Activation of Reminders [see Activation of Reminders (4.2.4.)]
• Reminder 1 before Lifetime (Required) [see Reminder 1 before Lifetime (Required)
(4.2.5.)]
• Reminder 2 before Lifetime (Demanded) [see Reminder 2 before Lifetime (Demanded)
(4.2.6.)]
1. Open the window Remaining Device Lifetime
2. After modifying values/units as required, click on Apply to accept the change.
• Click on Snooze for 1 Year to add a year to the Total Expected Device Life.
Calibration Schedule
[see Calibration Schedule (4.5)]
• Calibration Interval [see Calibration Interval (4.5.1.)]
• Time Since Last Calibration [see Time Since Last Calibration (4.5.2.)]
• Time Until Next Calibration (read only) [see Time Until Next Calibration (4.5.3.)]
• Activation of Reminders [see Activation of Reminders (4.5.4.)]
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Remote operation
7.1 Operating via AMS Device Manager
95