Siemens SITRANS L Operating Instructions Manual page 143

Unit (2.6.5.3.)
Engineering unit to be displayed with the output value.
Values
Decimal Point (2.6.5.4.)
Read only. The number of digits to display after the decimal point (set to two decimal places).
Alarms and Warnings (2.6.6.)
High Limit Alarm (2.6.6.1.)
The setting for the upper alarm limit in AIFB1 units.
Values
High Limit Warning (2.6.6.2.)
The setting for the upper warning limit in AIFB1 units.
Values
Low Limit Warning (2.6.6.3.)
The setting for the lower warning limit in AIFB1 units.
Values
Low Limit Alarm (2.6.6.4.)
The setting for the lower alarm limit in AIFB1 units.
Values
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
m, cm, mm, ft, in, cu m, L, HL, cu in, cu ft, cu yd, gal, imp gal,
bushels, Bbl, Bbl liquid, percent, PA, Follow out unit
* %
Range: -Infinity to Infinity
Default: Inf
Range: -Infinity to Infinity
Default: Inf
Range: -Infinity to Infinity
Default: -Inf
Range: -Infinity to Infinity
Default: -Inf
Parameter reference
143