Wizards (Resource); Operation (Resource) - Siemens SITRANS L Operating Instructions Manual

7.1.12.2

Wizards (RESOURCE)

Navigate to Configure/Setup > RESOURCE > Wizards > Quick Start for access to Quick Start
steps [see Quick Start Wizard via AMS Device Manager (Page 71)].
7.1.12.3

Operation (RESOURCE)

Navigate to Configure/Setup > RESOURCE > Operation.
Click on Block Modes to open the dialog window for access to:
Block Modes:
• Actual Mode
• Target Mode
• Permitted Mode
• Normal Mode
Note
• For descriptions of Block Modes see Operations (LTB) (Page 75).
• If the RESOURCE block is set to Out of Service, the LTB, and AIFB blocks are forced to Out
of Service also, but the LCD and DIAG blocks remain in Automatic mode
Click on Methods to open the dialog window for access to:
General:
• Master Reset: see Master Reset (4.1.)
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Remote operation
7.1 Operating via AMS Device Manager
93