Siemens SITRANS L Operating Instructions Manual page 72

Remote operation
7.1 Operating via AMS Device Manager
Step 1 - Identification
You can accept the default values without modification. (Descriptor, Message, and
Installation Date fields can be left blank.) If desired, make changes then click on Apply. (The
Apply button is activated when a parameter is modified.) Go to Step 2.
Step 2 - Application Type
Click on Step 2 - Application Type in the navigation window. Select the Application Type
(level or volume), Propagation Factor (if using a stillpipe application), and the Material. For a
Low Dielectric Liquid application in a stilling well, see example Application with Stillpipe
(Page 62). Click on Apply to save settings then go to Step 3.
72
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH