Accessing The Calibration Menu - AGFA DRY 3.4 Reference Manual

Accessing the calibration menu

1. Press the Key-operator key to enter the Key-operator mode.
2. Press the Down key six times, followed by the Confirm key to select
'Calibration'.
3. Press the Escape key to return to the Key-operator main menu.
4. Press the Escape key to quit the Key-operator mode.
DRY 3.4 | Advanced Operation (key-operator mode) | 59
Note: In case the printer is in printing mode, a screen will be
presented that the calibration cannot be done now, but has
to be reactivated later.
2604A EN 20180322 1454