AGFA DRY 3.4 Reference Manual page 36

36 | DRY 3.4 | Advanced Operation (key-operator mode)
4. Press the Confirm key to remove the modality name from the list, or the
Escape key to quit the procedure without any changes.
Related Links
Accessing the Change settings menu
Adding a modality
1. On the 'Change setting' screen, press the Down key three times, followed
by the Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
2. On the 'Network-Dicom' screen, press the Down key seven times, followed
by the Confirm key to select 'Add modality'.
3. The 'Add Modality' screen is displayed, asking you to collect the
appropriate info on the new modality (see your System Administrator if
necessary):
4. Press the Confirm key to continue, or the Escape key to quit the procedure
without any changes.
The 'Enter modality daily used name' screen is displayed:
5. Enter the modality daily used name (nickname) by means of the arrow
keys. Make sure not to enter more than 8 characters.
6. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select modality brand' screen is displayed:
2604A EN 20180322 1454
on page 23
Note: A blank daily used modality name is not allowed.