AGFA DRY 3.4 Reference Manual page 26

26 | DRY 3.4 | Advanced Operation (key-operator mode)
2. On the 'General' screen, press the Down key once, followed by the Confirm
key to select 'Language'.
The 'Language' screen is displayed with the available languages. For
example:
The current language is marked with an asterisk (*).
3. Press the Up/Down arrow keys, followed by the Confirm key to select the
desired language.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Changing the sorter configuration
1. On the 'Change setting' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
2. On the 'General' screen, press the Down key twice, followed by the
Confirm key to select 'Sorter Configuration'.
The 'Sorter Configuration' screen is displayed:
2604A EN 20180322 1454
Note: The number of displayed languages depends on the
installed dataset. Contact your local service organization for
the latest language availability status.
on page 23