Table of Contents
Advertisement
Restoring printer settings from the hard disk
Press the Up/Down arrow keys in the 'Restore configuration' screen to
select the required printer settings from the hard disk, followed by the
Confirm key.
The following screen is displayed.
If you want to restore the configuration on the back-up floppy, select 'yes'
and press the Confirm key. The printer will now enter the 'Saving the
current configuration'.
If you only want to restore the configuration on the printer hard disk,
select 'no' and press the Confirm key.
After the restore operation, the following screen is displayed.
Press the Confirm key to reset the printer. After the reset, the new settings
will be active.
Press the Escape key to quit the application. The old settings will remain
active until the next reset.
Related Links
Accessing the restore configuration menu
DRY 3.4 | Advanced Operation (key-operator mode) | 57
on page 54
2604A EN 20180322 1454
Advertisement
Table of Contents
