AGFA DRY 3.4 Reference Manual page 34

34 | DRY 3.4 | Advanced Operation (key-operator mode)
The 'Netmask' screen is displayed:
If the Netmask has already been assigned, it will be shown on the display.
3. Enter the Netmask by means of the arrow keys.
Example: If the Netmask is 250.760.560. 0, then the data entry should be
as follows:
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
Changing the Router IP-address
1. On the 'Change setting' screen, press the Down key three times, followed
by the Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
2. On the 'Network-Dicom' screen, press the Down key five times, followed by
the Confirm key to select 'Router IP-address'.
The 'Router IP-address' screen is displayed:
2604A EN 20180322 1454
Note: When no DHCP server is available and when the
subnet mask of the printer has never been set, the subnet
mask will be set to the APIPA address 255.255.0.0.
Note: Note that blank spaces will not be filled in.
on page 11
on page 23