AGFA DRY 3.4 Reference Manual page 28

28 | DRY 3.4 | Advanced Operation (key-operator mode)
4. Use the Up/Down arrow keys to select the output trays for the particular
modality and press the Left/Right arrow keys to install button to uninstall/
install the output tray.
If you have selected more than one input tray, you must consecutively
assign the output trays.
Related Links
Accessing the Change settings menu
Changing the beep on empty tray settings
1. On the 'Change setting' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
2. On the 'General' screen, press the Down key four times, followed by the
Confirm key to select 'Beep on empty tray'.
The 'Audible alarm on empty tray' screen is displayed:
3. Use the Up/Down arrow keys to select the desired setting:
• Select 'No alarm' if you do not want an audible signal to warn you that
• Select 5 times to hear 5 consecutive beeps at the moment a tray gets
• Select 'While tray is empty' to hear a beep the whole time a tray is
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
2604A EN 20180322 1454
a tray is empty.
empty.
empty.
on page 23
on page 23