Film transport jams in output section
The following screen indicates that a jam occurred in the output section of the
film transport system.
To remove a jammed film in the output section of the transport system:
1. Open the top door.
2. Visually check where the film is jammed.
• If the film is jammed in the canting guide plate section,
proceed with step 3
• If the film is stuck in the sorter section,
proceed with step 7.
3. Locate the film. First try to use the transport buttons to help clearing the
jammed film.
4. If the transport buttons do not clear the film, lift the guide plate as shown
below:
WARNING:
Mind your head when the top door is open.
DRY 3.4 | Problem solving | 121
2604A EN 20180322 1454