AGFA DRY 3.4 Reference Manual page 37

7. Press the Up/Down arrow keys to select the appropriate modality brand
name.
In case you have selected 'Other', the Modality AE-title will be linked with
the default settings. Skip the next two steps.
8. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select modality type' screen is displayed:
9. The 'select modality AE-title' screen is displayed:
10. Press the Up/Down arrow keys to select the appropriate modality AE-title.
In case you have selected '1 Enter via keypad (manual)', the 'Enter
modality AEtitle' screen is displayed:
Enter the Modality AE-title by means of the arrow keys. Make sure not to
enter more than 16 characters.
11. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select output tray for <daily name or AE-title>' screen will appear:
Press the Up/Down arrow keys to select the output tray. You can
(de)activate the selected output tray with the Left/Right arrow keys.
DRY 3.4 | Advanced Operation (key-operator mode) | 37
2604A EN 20180322 1454