Table of Contents
Advertisement
46 | DRY 3.4 | Advanced Operation (key-operator mode)
3. Do one of the following:
• If you want to attribute the default profile, select 'Profile default' and
• If you want to add a custom profile, select 'Select other' and press the
4. The 'Image quality' screen for the selected modality is displayed:
5. On the 'Image quality' screen press the Down key twice, followed by the
Confirm key to select 'Dmax'.
The 'Dmax (maximum density)' screen for the selected modality is
displayed:
All maximum densities are selectable starting from 2.75 until 3.20 in steps
of 0.05 units. The current setting for the selected modality is marked with
an *.
6. Press the Up/Down arrow keys to select the desired Maximum Density
setting for this modality.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
2604A EN 20180322 1454
press the Confirm key.
You will return to the first screen.
Confirm key.
Note: The maximum density will be limited to the maximum
density of the media.
on page 23
Advertisement
Table of Contents
