Table of Contents
Advertisement
If the Router IP-address has already been assigned, it will be shown on the
display.
3. Enter the Router IP-address by means of the arrow keys.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
on page 11
Removing a modality
1. On the 'Change setting' screen, press the Down key three times, followed
by the Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
2. On the 'Network-Dicom' screen, press the Down key six times, followed by
the Confirm key to select 'Remove modality'.
The 'Remove modality' screen is displayed:
The modality names, entered during installation of the printer, are shown
in the list. If no names have been entered, the Called AE-titles are shown
instead. In case there is also a nickname (daily used name) defined during
installation, the nickname is used.
3. Select the modality which you wish to remove by means of the arrow keys.
DRY 3.4 | Advanced Operation (key-operator mode) | 35
Note: Note that blank spaces will not be filled in.
on page 23
2604A EN 20180322 1454
Advertisement
Table of Contents
