AGFA DRY 3.4 Reference Manual page 32

32 | DRY 3.4 | Advanced Operation (key-operator mode)
2. On the 'Network-Dicom' screen, press the Down key twice, followed by the
Confirm key to select 'Domain name'.
The 'Domain name' screen is displayed:
If the domain name has already been assigned, it will be shown on the
display.
3. Enter the domain name by means of the arrow keys.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
Changing the Printer IP-address
1. On the 'Change setting' screen, press the Down key three times, followed
by the Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
2. On the 'Network-Dicom' screen, press the Down key three times, followed
by the Confirm key to select 'Printer IP-address'.
The 'Printer IP-address' screen is displayed:
If the IP-address has already been assigned, it will be shown on the
display.
2604A EN 20180322 1454
Note: Entries are case sensitive.
on page 11
on page 23