AGFA DRY 3.4 Reference Manual page 42

42 | DRY 3.4 | Advanced Operation (key-operator mode)
The current default densitometer is marked with an *.
4. Press the Up/Down arrow keys to select the default densitometer.
5. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Changing Image quality setting for a modality - Selecting a lookup
table
1. On the 'Change settings' screen, press the Down key four times, followed
by the Confirm key to select 'Image quality'.
The following screen will appear:
2. Press the Up/Down arrow keys to select the modality for which you want
to change the image quality settings.
The 'Image quality' screen for the selected modality is displayed:
3. Do one of the following:
• If you want to attribute the default profile, select 'Profile default' and
• If you want to add a custom profile, select 'Select other' and press the
2604A EN 20180322 1454
Note: All shown densities will vary slightly according to the
densitometer selection.
press the Confirm key.
You return to the first screen.
Confirm key.
on page 23