68 | DRY 3.4 | Advanced Operation (key-operator mode)
4. Press the Confirm key to confirm the back-up.
The following screens appears successively:
5. After saving, the printer asks you to insert the back-up floppy.
6. Insert the back-up floppy disk.
The drive is located at the rear of the printer.
7. Press the Confirm key to continue.
The following screen is displayed:
The printer saves the configuration on the back-up floppy disk.
When the writing process has finished, the following screen is displayed:
2604A EN 20180322 1454
Note: If you do not wish to update your back-up copy, press
the Escape key and go to step 10.