AGFA DRY 3.4 Reference Manual page 69

8. Remove the floppy disk and press the Confirm key.
The following screen is displayed:
9. Press the Confirm key.
The back-up is finished and the system will now proceed with the actual
upgrade.
10. The 'Install data-sets' screen is displayed:
11. Insert the (first) floppy disk.
The drive is located at the rear of the printer.
12. Press the Confirm key to continue.
The following screens appear successively:
DRY 3.4 | Advanced Operation (key-operator mode) | 69
2604A EN 20180322 1454