Starting The Remote Session - AGFA DRY 3.4 Reference Manual

Starting the remote session

To start the remote session, enter the IP address of the printer in the
Address bar of the browser.
There are five access levels: operator, Key-operator, service engineer,
specialist and security administrator. Each level, except the operator level,
has its own user name and password.
DRY 3.4 | Controlling the printer via a remote PC (with browser) | 95
Note: When starting the remote session, make sure the printer is
in 'Ready' mode.
Note:
A remote session disables the local keypad and display.
While you work remotely, the following screen is displayed:
2604A EN 20180322 1454