Table of Contents
Advertisement
16 | DRY 3.4 | Advanced Operation (key-operator mode)
Viewing input tray information
1. On the Show settings menu, press the Down key once, followed by the
Confirm key to select 'Input tray'.
The 'Input tray' screen is displayed:
2. Press the Up and Down keys followed by the Confirm key to select the
desired input tray.
In case you have selected Upper input tray, the Upper input tray screen is
displayed:
For both input trays, the following information is displayed on the
currently loaded film:
• the status (OK / disabled/overruled),
• the film type read from the Film Identification tag,
• the film format read from Film Identification tag,
• the film view,
• the total number of prints for the input tray,
• the number of prints for this film pack,
• the brand (ABC Code),
• the order number,
• the pack number.
3. Press the Confirm key to return to the Show settings menu.
2604A EN 20180322 1454
Note: If you have selected lower input tray, a screen with
similar information about the lower tray is shown.
Advertisement
Table of Contents
