Restoring Printer Settings From The Back-Up Floppy Disk - AGFA DRY 3.4 Reference Manual

Restoring printer settings from the back-up floppy disk

1. Press the Confirm key in the 'Restore configuration' screen to select 'From
floppy (recommend)'.
The following screen is displayed:
2. Insert the floppy disk which contains a back-up of the printer settings.
The drive is located at the rear of the printer.
3. Press the Confirm key to continue.
The following screens appear successively:
The printer restores the configuration on the hard disk.
The following screen is displayed.
DRY 3.4 | Advanced Operation (key-operator mode) | 55
Note: Make sure that you insert the correct floppy disk,
containing the printer settings you want to restore.
2604A EN 20180322 1454