AGFA DRY 3.4 Reference Manual page 27

3. Use the Up and Down keys to select the output tray you wish to configure
and press the Left/Right arrow keys to install/uninstall the output tray.
4. Click OK to install the indicated output tray.
Related Links
Accessing the Change settings menu
Changing the assignment modality - output tray
1. On the 'Change setting' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
2. On the 'General' screen, press the Down key three times, followed by the
Confirm key to select 'Assignment modal./tray'.
The 'Assignment modal./tray' screen is displayed:
3. Select a modality by using the select key and pressing Confirm.
The following window is displayed:
DRY 3.4 | Advanced Operation (key-operator mode) | 27
Note: An asterix left from an output tray indicates that the
respective output tray is installed.
on page 23
Note: The number of selections depends on the number of
modalities defined.
Note: An asterix left from an output tray indicates that the
respective output tray is installed.
2604A EN 20180322 1454