Mitsubishi Electric s-MEXT-G00 006 Technical Manual page 54

TM_s-MEXT_ME28relC_00_12_19_EN
Mask of the terminal
Average Temp. Regulat.
from BMS
24.5°C
Status:Online
h000000
h000000
00000
00000
00000
000002
000000
000002
000000
UNIT SERIAL NUMBER
032000000
Evolution+
Code ME 28.00 EN
HW pCO5+S
NAND 50MB
Flash 2MB + 7MB + 4MB
Ram 2048KB
Boot 05.01 Bios06.21
Clock

Clock card
not installed
Technical manual
Description
Display of the temperature sent by BMS.
If the temperature sent is not correct, error is displayed instead of the temperature.
If the BMS signal is lost, the words SIGNAL LOST flash instead of the word Online
Operating time of the fans and compressors in the various unit configurations
Operating time of the heaters and humidifier
Number of compressor start-ups
Number of compressor, heater and humidifier start-ups
Mask that displays the serial number of the unit.
This mask contains the reference information of the software [Code ME 28.00 EN].
The closed padlock symbol shows that the board is provided with its propriety software.
The second part of the mask shows information about the hardware: size (S), memories (NAND, Flash, Ram) and
the versions of the installed operating system (boot and bios).
Mask confirming access to the Clock menu.
Press "Up" or "Down" to scroll through the other masks and "Esc" to return to the menu selection list.
Submenu that can be used to adjust the internal clock and configure the time bands.

Mask indicating the lack or damage to the clock board.
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
54
N. Par.