Mitsubishi Electric s-MEXT-G00 006 Technical Manual page 37

TM_s-MEXT_ME28relC_00_12_19_EN
Mask of the terminal
Manual

Manual operation
enabling:
Internal fan manual
operation enabling:
Compressor 1 manual
operation enabling:
Heaters step 1 manual
operation enabling:
Heaters step 2 manual
operation enabling:
Internal Humidifier
>not active
Humidifier manual
operation enabling:
Start pre-cleaning:
>not active
Manual Drain: N
Dehumidify manual
operation enabling:
Digital freecooling
damper manual opening:
N
Analog freecooling
damper manual opening:
000%
Technical manual
Description
Access mask to the Manual submenu. Press "Up" or "Down" to scroll the other masks and "Esc" to return to the
submenu.
This submenu contains the masks for the manual control of the unit. This menu is used to reset the energy meter
counts and reset the operating hours and the start counts of the various unit components

Enables manual operation and manual operation of the internal fan
N
N
Enables the manual operation of compressor 1
N
Enables manual operation of heater 1 and enables manual operation of heater 2
N
N
Displays the operation of the internal humidifier and enables the manual operation of the humidifier
N
Start pre-cleaning command and manual drain command for internal humidifier
N
Manual dehumidification control (if dehumidification control enabled)
N
Manual opening of the digital Freecooling damper
Manual opening of the analogue Freecooling damper
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
37
N. Par.