TM_s-MEXT_ME28relC_00_12_19_EN
To change the "User" password access the "Info" menu inside the "User" menu and scroll the masks until the "User" password change mask appears:
The window to change the "Service" password, which can be accessed by entering the "Settings" menu, under the "Service" menu.
The window to change the "Factory" password can be accessed from the "Config" menu", under the "Factory" menu.
OBLIGATION
If the Factory password is changed, remember to re-enter the password generated by the service software at the end of the test, after maintenance is
completed.
INFORMATION
Some parameters in the "Factory" menu can only be changed after switching off the unit (OFF).
Technical manual
Insert a NEW
USER
password
0000
12
TRANSLATION OF THE ORIGINAL INSTRUCTIONS