TM_s-MEXT_ME28relC_00_12_19_EN
2.6
SAFETY REDUCTION LOAD (LP) DISPLAY MASK
Visible from: "Unit" menu
Zone 1: Fan status
Zone 2: Status of the unit controlled by the PAC-IF interface
Zone 3: Protection status
NORMAL WORK
(LP) → ACTIVE
Technical manual
ZONE 1
ZONE 3
Figure 2-10: Safety Reduction Load mask representation
Icon
Meaning
Normal fan operation
Fan in Alert mode (Flashing):
•
With SRL (LP) active:
The speed of the fans increases with 2 alert steps
Icon
Meaning
Normal operation
Unit in Alert mode (Flashing):
•
With SRL (LP) active:
The request is stopped at its last value before entering alert mode
Unit in Protection mode (Flashing):
•
With SRL (LP) active:
The request sent to the unit decreases based on the set parameters
Icon
Meaning
Protection enabled but not active
SRL (LP) low pressure protection active
ZONE 2
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
23