Mitsubishi Electric s-MEXT-G00 006 Technical Manual page 31

TM_s-MEXT_ME28relC_00_12_19_EN
Mask of the terminal
--------------- P21.17
%RH band to deact.
freec. damper: 01.0%RH
--------------- P21.18
Freecooling damper
management during
compr. alarm status:
N
--------------- P21.19
Set point for freec.
damper during compr.
alarm: 01.0°C
--------------- P21.20
Band for freec. damper
during compr. alarm:
00.5°C
Settings

--------------- P22.92
Unit gas type:
R32
--------------- P22.01
Low temperature alarm
set point: 10°C
--------------- P22.02
High temperature alarm
set point: 32°C
--------------- P22.03
Low humidity alarm
set point: 30%RH
--------------- P22.04
High humidity alarm
set point: 80%RH
--------------- P22.13
Set unit working hours
to maintenance: 00000h
--------------- P22.14
Set comp. 1 working h.
to maintenance: 00000h
Technical manual
Description
Parameter for setting the humidity band to disable the Freecooling damper
Parameter for configuring Freecooling damper management with compressor alarm (N:disabled - Y:enabled)
Parameter for setting the Setpoint (T_
Parameter for setting the Freecooling damper regulation band with compressor alarm
Access mask to Settings submenu. Press "Up" or "Down" to scroll the other masks and "Esc" to return to the
submenu. The Settings menu contains the parameters relative to the alarm settings.

Parameter used to set the type of gas used in the cold circuit
Parameter for setting the Low temperature alarm setpoint
Parameter for setting the High temperature alarm setpoint
Parameter for setting the Low humidity alarm setpoint
Parameter for setting the High humidity alarm setpoint
Parameter for setting the unit operating hours setpoint for maintenance
Parameter for setting the compressor 1 operating hours setpoint for maintenance
-T_ ) to regulate the Freecooling damper with compressor alarm
ROOM EXTERNAL
31
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
N. Par.
21.17
21.18
21.19
21.20
22.92
22.01
22.02
22.03
22.04
22.13
22.14