Mitsubishi Electric s-MEXT-G00 006 Technical Manual page 38

TM_s-MEXT_ME28relC_00_12_19_EN
Mask of the terminal
Energy Managment
Config CPT network: Y
0:NO ERROR
0:NO ERROR
baud rate CPT OK
CT Ratio OK System OK
Programming OK (Esc)
Energy Managment
Energy: 0000005kWh
Time: 0000001 h
Reset counters: Y
h000000
h000000
h000000
h000000
h000000
000002
RES:N
000000
RES:N
000002
RES:N
000000
RES:N
Manual Set
h000000
RES:N
h000000
RES:N
Manual Set
00000
00000
00000
Manual Set
0000002
Technical manual
Description
Network transducer configuration.
Baud rate change from 9600 to 19200 and sending of TA ratio and system type parameters.
Display and possible reset of the energy counters and energy transducer timer
Operating time of the fans and compressors in the various unit configurations
Operating time of the heaters and humidifier
Reset number of compressor starts
Reset number of heater and humidifier starts
Reset times of operation of the fans and compressors in the various configurations of the unit and manual setting
of the times at which to start
Reset times of operation of the heaters and humidifier and manual setting of the times at which to start
Reset number of compressor starts and manual setting of the times at which to start
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
38
N. Par.