TP-Link TL-WR802N User Manual page 98

Chapter 5
•
•
•
•
•
3. Click Save.
5. 8. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
• DoS Protection
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note:
Dos Protection will take effect only when the Statistics in
• Enable ICMP-FLOOD Attack Filtering
function.
Downloaded from ManualsNet.com
FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep
the default Enable.
TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep
the default Enable.
H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT,
keep the default Enable.
SIP ALG - To allow some multimedia clients to communicate across NAT, click
Enable.
RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable.
Advanced Security
Security > Advanced
- Denial of Service protection. Select Enable or Disable to enable or
search engine
Configure the Router in WISP Mode (Hotspot Mode)
Security, and you can protect the router from being
System Tools > Statistics
- Tick the checkbox to enable or disable this
is enabled.
94