TP-Link TL-WR802N User Manual page 172

Chapter 8
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address
is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this
case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS)
queries.
•
•
•
•
•
3. Click
4. The
the following figure, the connectivity of the internet is fine.
8. 6. 2.
TP-Link is dedicated to improving and richening the product features, giving users a
better network experience. We will release the latest firmware at TP-Link official website
www.tp-link.com. You can download the lastest firmware file from the
our website and upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to
4. Click
Downloaded from ManualsNet.com
IP Address/Domain Name
192.168.0.1) or Domain name (such as www.tp-link.com).
Pings Count - The number of Ping packets for a Ping connection.
Ping Packet Size - The size of Ping packet.
Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is
no reply in the specified time, the connection is overtime.
Traceroute Max TTL - The max number of hops for a Traceroute connection.
Start to check the connectivity of the internet.
Diagnostic Results page displays the diagnosis result. If the result is similar to
Firmware Upgrade
System Tools > Firmware
Choose File to locate the downloaded firmware file, and click Upgrade.
search engine
Configure the Router in Client Mode
- Enter the destination IP address (such as
Upgrade.
Support page of
168