TP-Link TL-WR802N User Manual page 138

Chapter 6
• Secondary DNS Server (Optional)
ISP provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
• When you choose
as below.
6. 6. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
the router.
• Client Name
• MAC Address
• Assigned IP
• Lease Time
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
Downloaded from ManualsNet.com
Smart IP(DHCP) in Network
DHCP Clients List
DHCP > DHCP Clients List
- The name of the DHCP client.
- The MAC address of the DHCP client.
- The IP address that the outer has allocated to the DHCP client.
- The time of the DHCP client leased. After the dynamic IP address has
search engine
Configure the Router in Access Point Mode
- Input the IP address of another DNS server if your
> LAN, the DHCP Server function will be disabled. You willsee the page
to view the information of the clients connected to
Obtain an IP Address
134