Ip & Mac Binding - TP-Link TL-WR802N User Manual

Chapter 5
4. Click
• IP Range
noneffective.
• Port Range
blank or 0, the domain is noneffective.
• Protocol
• Priority
'8' stands for the lowest priority. The total Upstream/ Downstream Bandwidth is first
allocated to guarantee all the Min Rate of Bandwidth Control rules. If there is any
bandwidth left, it is first allocated to the rule with the highest priority, then to the rule
with the second highest priority, and so on.
• Egress Bandwidth
• Ingress Bandwidth
5. 13. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
Downloaded from ManualsNet.com
Add New, fill in the blanks and click Save.
- Interior PC address range. If both are blank or 0.0.0.0, the domain is
- The port range which the Interior PC access the outside PC. If all are
- Transport layer protocol, here there are ALL, TCP, UDP.
- Priority of Bandwidth Control rules. '1' stands for the highest priority while
- The max and the min upload speed through the WAN port.
- The max and the min download speed through the WAN port.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
101