TP-Link TL-WR802N User Manual page 93

Chapter 5
Virtual Servers can be used to set up public services in your local network, such as
HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
I want to:
Share my personal website I've built in local network with my friends through the internet.
For example, the personal website has been built in my home PC (192.168.0.100). I hope
that my friends on the internet can visit my website in some way. My PC is connected to
the router with the WAN IP address 218.18.232.154.
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to
4. Click
internal port and protocol will be automatically filled in. Enter the PC's IP address
192.168.0.100 in the
5. Leave the status as
Note:
• It is recommended to keep the default settings of
which port and protocol to use.
• If the service you want to use is not in the
parameters manually. You should verify the port number that the service needs.
• You can add multiple virtual server rules if you want to provide several services in a router. Please note
that the
Done!
Users on the internet can enter
Downloaded from ManualsNet.com
Personal Website Router
LAN
Home
Forwarding > Virtual Server.
Add New. Select HTTP
IP Address
Enabled
Service Port should not be overlapped.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
WAN: 218.18.232.154
from the Common Service Port
field.
and click Save.
Internal Port and
Common Service Port
http:// WAN IP (in this example: http:// 218.18.232.154)
INTERNET
list. The service port,
Protocol if you are not clear about
list, you can enter the corresponding
89