TP-Link TL-WR802N User Manual page 10

Chapter 2
2. 2. 2.
In WISP mode, the router enables multiple users to share internet connection anywhere
public Wi-Fi exists. For example: hotel room, trade show, ...
1. Connect the router according to Step A to B.
2. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card or on
the product label at the bottom of your router to connect to the Wi-Fi.
2. 2. 3.
Create a wireless network from an Ethernet connection. This mode is suitable for dorm
rooms or homes where there's already a wired router but you need a wireless hotspot.
1. Connect the router according to Step A to C.
2. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card or on
the product label at the bottom of your router to connect to the Wi-Fi.
Note:
If the hotel's internet has an authentication process, you will need to authenticate it on EACH device.
2. 2. 4.
Repeat signal from an existing wireless network. This mode is suitable to extend
wireless coverage, reaching devices that were previously too far from your primary
Downloaded from ManualsNet.com
WISP Mode (Hotspot Mode)
B
Access Point Mode
C
Range Extender Mode
search engine
A
A
B
Connect the Hardware
Public Wi-Fi
Internet
Existing Router
6