Ipv6 - TP-Link TL-WR802N User Manual

Chapter 4

4. 15. IPv6

This function allows you to enable IPv6 function and set up the parameters of the
router's Wide Area Network (WAN) and Local Area Network (LAN).
4. 15. 1. IPv6 Status
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
the router.
• WAN
• TPv6 LAN
including
4. 15. 2. IPv6 WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
IPv6 > IPv6 Status, and you can view the current IPv6 status information of
- This section shows the current IPv6
- This section shows the current IPv6 information of the router's LAN port,
IPv6 Address Type,
IPv6 > IPv6 WAN. Select
search engine
Configure the Router in Wireless Router Mode
Connection
Prefix Length and IPv6
Enable IPv6.
Type.
Address.
51