System Tools - TP-Link TL-WR802N User Manual

Chapter 5
•
•
Note:
If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to make
sure "Tunnel 6to4" works properly.

5. 16. System Tools

5. 16. 1. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
Address Auto-Configuration Type
the computers in your LAN. RADVD and DHCPv6 Server are provided. I
Site Prefix Configuration Type
• Delegated - Get the IPv6 address prefix from the ISP automatically, and the
device will delegate it to the LAN.
• Static - Configure the
contact your ISP to get more information before you configure them.
System Tools > Time Settings.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
- Select a type to assign IPv6 addresses to
- The type of IPv6 address prefix.
Site Prefix and Site Prefix Length manually. Please
110