Dhcp - TP-Link TL-WR802N User Manual

Chapter 8
5. Tick
network with this specific MAC address.
6. Click Save.
8. 5.
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
8. 5. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Specify DHCP server settings and click Save.
Downloaded from ManualsNet.com
Lock to AP checkbox if you want to restrict the device's connection to only the

DHCP

DHCP Settings
DHCP > DHCP Settings.
search engine
Configure the Router in Client Mode
165