TP-Link TL-WR802N User Manual page 102

Chapter 5
3 ) Click Save.
5. Go to
1 ) Click
2 ) Give a name for the rule in the
3 ) Leave the status as
Note:
When
the host can only visit or is not allowed to visit the URL address you set.
6. Select
7. Select
through the Router
Downloaded from ManualsNet.com
Access Control > Rule
Add New.
drop-down list; select target_1
from the schedule drop-down list.
Enabled
Target is set to be URL Address
Enable Internet Access Control
Allow the packets specified by any enabled access control policy to pass
as the default filter policy and click Save.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
and add a new access control rule.
Description field. Select
from the target drop-down list; select
as click Save.
mode, the Direction field is
to enable Access Control function.
host_1 from the LAN host
schedule_1
OUT and not editable, which means
98