TP-Link TL-WR802N User Manual page 19

Chapter 4
• MTU(Bytes)
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Enable IGMP Proxy
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration
for client devices, such as the modem router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
• Get IP with Unicast
applications. If you cannot get the IP address normally, you can choose this option. (It
is rarely required.)
• Set DNS server manually
DNS server manually and enter the primary and secondary addresses into the correct
fields. Otherwise, the DNS servers will be assigned automatically from your ISP.
• Host Name
Static IP
If your ISP provides a static or fixed IP address, subnet mask, default gateway and DNS
setting, please select
• IP Address
• Subnet Mask
ISP. Normally 255.255.255.0 is used as the subnet mask.
• Gateway
ISP.
• Primary/Secondary DNS Server
dotted-decimal notation provided by your ISP.
• MTU (Bytes)
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
Downloaded from ManualsNet.com
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
- IGMP (Internet Group Management Protocol) is used to manage
- A few ISPs' DHCP servers do not support the broadcast
- If your ISP gives you one or two DNS addresses, select Set
-This option specifies the name of the router.
Static IP.
- Enter the IP address in dotted-decimal notation provided by your ISP.
- Enter the subnet mask in dotted-decimal notation provided by your
- Enter the gateway IP address in dotted-decimal notation provided by your
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
search engine
Configure the Router in Wireless Router Mode
- (Optional) Enter one or two DNS addresses in
15