TP-Link TL-WR802N User Manual page 157

Chapter 7
• Default Gateway (Optional)
the router. The default value is 192.168.0.1.
• Default Domain (Optional)
• DNS Server (Optional)
• Secondary DNS Server (Optional)
ISP provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
• When you choose
as below.
7. 5. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
the router.
• Client Name
• MAC Address
• Assigned IP
Downloaded from ManualsNet.com
- It is suggested to input the IP address of the LAN port of
- Input the domain name of your network.
- Input the DNS IP address provided by your ISP.
Smart IP(DHCP) in Network
DHCP Clients List
DHCP > DHCP Clients List
- The name of the DHCP client.
- The MAC address of the DHCP client.
- The IP address that the outer has allocated to the DHCP client.
search engine
Configure the Router in Range Extender Mode
- Input the IP address of another DNS server if your
> LAN, the DHCP Server function will be disabled. You willsee the page
to view the information of the clients connected to
Obtain an IP Address
153