TP-Link TL-WR802N User Manual page 50

Chapter 4
upload/download speed through the WAN port. The value should be less than
100,000Kbps.
4. Click
• IP Range
noneffective.
• Port Range
blank or 0, the domain is noneffective.
• Protocol
• Priority
'8' stands for the lowest priority. The total Upstream/ Downstream Bandwidth is first
allocated to guarantee all the Min Rate of Bandwidth Control rules. If there is any
bandwidth left, it is first allocated to the rule with the highest priority, then to the rule
with the second highest priority, and so on.
• Egress Bandwidth
• Ingress Bandwidth
Downloaded from ManualsNet.com
Add New, fill in the blanks and click Save.
- Interior PC address range. If both are blank or 0.0.0.0, the domain is
- The port range which the Interior PC access the outside PC. If all are
- Transport layer protocol, here there are ALL, TCP, UDP.
- Priority of Bandwidth Control rules. '1' stands for the highest priority while
- The max and the min upload speed which through the WAN port.
- The max and the min download speed through the WAN port.
search engine
Configure the Router in Wireless Router Mode
46