System Tools - TP-Link TL-WR802N User Manual

Chapter 6
6. 6. 3.
You can reserve an IP address for a specific client. When you specify a reserved IP
address for a PC on the LAN, this PC will always receive the same IP address each time
when it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Click
1 ) Enter the MAC address (in XX:XX:XX:XX:XX:XX format.) of the client for which
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
3 ) Leave the
4 ) Click Save.
6. 7.
6. 7. 1.
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
Address Reservation
DHCP > Address Reservation.
Add New and fill in the blanks.
you want to reserve an IP address.
the client.
Status as Enabled.

System Tools

Diagnostic
System Tools > Diagnostic.
search engine
Configure the Router in Access Point Mode
135