TP-Link TL-WR802N User Manual page 112
300mbps wireless n nano router
Hide thumbs
Also See for TL-WR802N:
- User manual (288 pages) ,
- Quick installation manual (44 pages) ,
- Configuration manual (4 pages)
Table of Contents
Advertisement
Chapter 5
Static IPv6
•
•
•
•
•
•
•
PPPoEv6
Downloaded from
ManualsNet.com
IPv6 Address
- Enter the IPv6 address provided by your ISP.
Prefix Length
- The length of IPv6 address prefix.
IPv6 Gateway
- Enter the default gateway provided by your ISP.
IPv6 DNS
Server- Enter the DNS IPv6 address provided by your ISP.
Secondary IPv6 DNS Server
your ISP.
MTU(Bytes)
- The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
- Enter another DNS IPv6 address provided by
108
Advertisement
Table of Contents
