TP-Link TL-WR802N User Manual page 129

Chapter 6
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select
click Connect.
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as
Downloaded from ManualsNet.com
Enabled
Enter new device PIN, enter your client device's current PIN in the
Enabled
search engine
Configure the Router in Access Point Mode
and click Add Device.
and get the Current PIN
PIN filed and
of the router.
125