TP-Link TL-WR802N User Manual page 77

Chapter 5
•
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
PPTP
If your ISP provides PPTP connection, please select PPTP.
• Username/Password
fields are case-sensitive.
• Addressing Type
or Static IP. Click the
button to disconnect immediately.
• MTU(Bytes)
recommended that you change the default MTU Size unless required by your ISP.
• Enable IGMP Proxy
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration
for client devices, such as the modem router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
Downloaded from ManualsNet.com
Connect Manually - You can click
immediately. This mode also supports the
on Demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
- Enter the username and password provided by your ISP. These
- Choose the addressing type given by your ISP, either Dynamic IP
Connect
- The default MTU size is "1420" bytes, which is usually fine. It is not
- IGMP (Internet Group Management Protocol) is used to manage
search engine
Configure the Router in WISP Mode (Hotspot Mode)
Connect/Disconnect
Max Idle Time
button to connect immediately. Click the
to connect/disconnect
function as Connect
Max Idle Time because some
Disconnect
73